Відео

Excellent tutorial! Really, thank you very much! 💯 Unfortunately, the switch on the Redragon Cobra-chroma M711 mouse cannot be opened. They even look a little different. Most likely; it can only be fixed by desoldering and replacing it. The only thing I could do was spray it with some electronic cleaning oil [Silijet E-plus]. I don't think it will work; but it was the only thing I could do. If it doesn't work with the cleaning oil; I don't know how convenient it would be to change the switch since the mouse cost me $600 MXN [$30 USD]. - Ramón 🇲🇽

G102 try this and success thank man

Worked like a charm. Thank you very much.

thanks for the review. I just want to ask will the surge protector of the avr work with 2 prong wire? I live in the Philippines and the majority of houses here do not have a ground wire in the main/wall outlet. Thank you, I hope you can answer 

safety work

yan pa rin po ba gamit nyo until now?

Thx, it works on Logi G603

This is the only thing that worked for me. Thanks for the video. You're heaven sent ❤

thanks now my mouse is working again thank you thank you thank you best of best azbest

Thanks for the video, it helped me out!!!!

You saved my life, thank you, now the left clic is working perfectly, for the people looking in comments, you have to use a really small screwdriver to lift the metal part that closes the circuit, I personally used the Truper JOY-32, and other recommendation is to not lift so much the circuit plate because the laser might fall off. Salvaste mi vida, gracias, ahora el clic derecho esta trabajando perfectamente, para las personas leyendo los comentarios, tienen que usar un desarmador muy pequeño para levantar la parte de metal que cierra el circuito, yo personalmente usé el Truper JOY-32, y otra recomendación es no levantar mucho la placa de circuitos porque el laser se puede caer.

4G+

Just tried your method and it's working well now. Thank you :) by the way, for whoever is gonna try fixing it, you should have a really small screwdriver. I couldn't at home so I opened screws with a knife. If you haven't done it before I'm son recommending. and the metal part is really small so careful :) thank you for the video

My Globe sim can't connect to any network right now at it's registered... as in no service... and I really need it for OTPs for gcash and maya. I have a vivo y11. I've tried inserting into my iphone to see if it would make a difference but nothing. Is there anything I can do.

IT WORKED!!!!! Kudus!!!!!!!

You could likely use voicemeeter to set up a virtual audio cable.

Thank you so much! You are a life saver!

As soon as you opened it I felt sick! There are no words, from CPB to components, not to mention the sizing of the wires! Which maybe aren't even copper! It's a nightmare.

Ojalá hubiera encontrado este vídeo antes, cuando mi g300s empezó a fallar pensé en comprar otro pero este modelo había duplicado su precio así que compré un mouse onikuma de calidad inferior, después de un año el onikuma empezó a fallar también así que decidí tratar de reparar el g300s y este vídeo fué de mucha utilidad, ahora puedo usar mi mouse de nuevo, muchas gracias!!

cảm ơn bạn

How annoying I cant just have the mouse buttons as buttons I can assign in game. I have to assign it to a key, and then configure every game to use them keys, some games will conflict with that key.

I have nat type F😅

I took small piece of paper and put few drops of isopropyl alcohol on it and squize it between joints when they were closed and move it few times, that cleaned and degreased surfaces, seemd worked for me perfectly

Idk how my internet is lagging at 4g+ fucking bullshit

i tried to register and none of them connected successfully

Hey 😢 how can i fix my computer's i also turn off while pc update

Hello, can't get mine working po. It still SOS. I changed the data choose Telstra and use a 3g under settings, do I need to subscribe to their promo? But this gets me back into circle as I need an otp first to get any transactions whether gcash or bank transfer payment to happen. :) What am I doing wrong po.

Bro, I had this problem for 2 months and have tried all sorts of things (also registered to Globe roaming promos) but no luck. Your video tutorial is the REAL SOLUTION to fix this problem. THANK YOU!!! Gave a like and subscribed button. Thanks again mate!

This is exactly what i thought i had to do. ill be using audio cable to "sandbox" this, so i can continue to use my computer normally.

bro, suggest to hide your mobile number too. have a nice day! peace~

Great job thank you. Keep it up

it doesnt work with Note10+

I did exactly what you show, with the same mouse, and now it's worse than ever. I have 95% times double click when I click once, while it was maybe 25% before. It's time to buy a new one I guess.

exactly my issue and after fix it looks ok, thanks man!

Yes this is true. On their website its says that we dont need to do anything, roaming signal is auto activated. However when i reach my destination, i cant connect to either of the network. It says your simcard does not allow you to connect on this network. I contact the globe cs and this exactly what they said. Minutes later without doing anything surprisingly i got a signal already. It leads me to a conclusion that globe locked their sim on purpose for us tovsubscribed to their data promos.

hello..how about my infinix note 30 pro? what code i will be dial to open this?

*Ok. I tried this, successfully.* I have to say, those components are smaller than I thought and I had to use some additional light source and even my phone's macro lens (plus zoom) to be able to see it correctly. As you say, arching the "H" on the plate is enough to give more tension to the spring (the "U" from beneath is the actual spring but arching the H is way easier and safer) This gives more resistance to the click but you will get use to it fairly quick. The intervention was safe. There's barely any risk of damaging components, just be careful when prying open the switch casing. After the procedure I put everything back on its place, put the same gliders on and we are rolling. Advices: - Take a moment to clean your mouse as it's probably full of dead skin, dust and hairs. - Take pictures of your progress in case you need to take a step back or don't remember the case or spring plate orientation.

Please 🙏🏻 tecno pova 4pro

Damn the fan noise is crazy 😢

I have a new mouse and didn't know how to use it until I watched this video, THANK YOU

Hi @DeuteriumTech... I just saw this today. What battery did you and where did you get it. I got the K1 as well and want to revive it for media consumption. Salamat ng marami.

I have a question. After completing the BIOS installation without a processor, I notice that the panel continues to light. Is it normal to turn it off by turning off the power supply button or what?

Did you change the battery capacity info in the Rom?

aio that fails in 3 years is an RMA waiting to happen.

meanwhile my aio is 8 years old without problems even though it’s been through all different situations and played on daily sometimes even a week straight

My phone is redmagic, snapdragon 888+ Not working this 😔

GLOBE at DITO, ang sarap nyo pag untugin! eh! , halos diko magamit yung data ko dahil pahirapan ang signal dito sa Quezon Bukidnon palibhasa luma na cellphone ko, puro LOADING LOADING yung internet ang resulta nabawasan agad yung data ko! puro kayu! MAG NANAKAW! wala kayung kwenta! pahirap! kayu sa mga Pilipino! ang kakapal ng mga mukha nyu! ito yung bagong version ng harapang nakawan!

you cant use gel toothpaste

wala naman talagang kwenta ang globe customer service! putang ina!